|Hopper Capacity||4 cu.mtr|
|Turning Radius Outside||4.6 mtrs|
|Working Speed||35 m/min|
|Max Production||120 t/h|
|Mat Thickness||100 mm|
|Travels Speed||16 km/h|
|Overall Length||5600 mm|
|Overall Height||3100 mm|
|Operating Width (min)||2850 mm|
|Operating Width (max)||4500 mm|
|Extension Adjustments||Gear Based Up & Down Extension Adjustments|
|Hydraulic Oil||50 L|
|Diesel Fuel||100 L|
|Output At 1800 Rpm||60 HP|
|Cooling System||Water Cooled|
|Nos. of Cylinder||4|
The Road Paver Finisher is designed and developed as per industry leading standards. The plant is used for laying wet mix macadam & dry lean concrete in line. Owing to its excellent performance and cost effectiveness, the equipment is used at various construction sites. The paver finisher is the user friendly solution that ensure trouble free and noiseless operation.
Kirloskar / equivalent water cooled / diesel engine of adequate horsepower provided with 12 volts electrical starting system.
Through a multiple clutch and a 4-Speed Gearbox to an auxiliary low, high & reverse Gearbox & differential unit provided with differential locking facility. Final drive from the differential to the wheels is through roller chain and sprocket mechanism. Hydraulic Traction option also available.
Hoppers have low dump clearance to handle all type of trucks. The wings are raised or lowered hydraulically to give a smaller overall width for transportation and for self-cleaning action during feeding of the asphaltic concrete onto the conveyor.
Twin bar conveyors are provided to feed the material from hopper on to the screws (augers). The conveyors can be independently controlled.
Spreading Screws (Augers)
The asphaltic concrete flows from the main hopper into another hopper containing the augers. These augers are adjustable to cover the full width of the paved surface and each side has independent control.
Tamper Initial compaction of the material is effected through the optional tamper. The tamper is actuated by means of eccentric journals mounted on sturdy roller bearings.
A heated, fully floating, hydraulically operated and vibrating screed is provided, covering the full length of the paved width. It ensures a predetermined thickness of the asphaltic concrete layer by striking off the excess material. The screed is adjustable for height and camber.
All controls are provided within easy reach of the operator from a comfortable driving seat.
The material specifications of all parts is as per ISI recommendations viz. abrasion-resistant steels for hopper, conveyor, auger screws, tamper, screed etc., all gears and sprockets are of requisite quality of steel and properly heat-treated. Easy accessibility to all parts for maintenance, inspection and overhaul has been given utmost importance in design.
Oil pressure meter, water temperature meter, ampere meter, 12 volt horn, full extensions for screws, screed and tamper, hour meter, edger plates, guides, cut-off shoes, bevel edges, screed heater, spray down equipment, comprehensive tool kit, operator hand book, semi rotary fuel pump for filling fuel tank from barrels and working/traveling lights.
Also available in screed with mechanical extensions up to 3.65 mtrs (if required)